Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 11-21-2011, 06:45 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
well those were all in the vert and since I was having some issues with the vert hold range I figured may as well start there. No reason to chase down pairing until I get the vert range worked out.

Oh and I did try subbing some vert tubes, I know that multivibrators are by there nature are unstable and different tubes behave differently.

I checked the .0082 cap that was the one of the plate, again almost no movement on the cap tester. Replaced it, did check the replacement going in, just to be sure it was not the cap tester, worked as should. I do test the caps completely out of the circuit as sometimes the cap tester gives false readings, even if one leg is completely out of circuit. while I am in there I am replacing any resistors that would be hard to get at with the cap in place there is one that sits right under the .0082. its 100k tested at 93k so normally I would leave it be, but since I would have to remove the cap just to get at it later, I figured what not replace know.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:14 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.