![]() |
|
|
|
#1
|
||||
|
||||
|
Many of my sets working with all or 80% of the original capacitors.
However, this is the adventure of today... The vertical is open at 90%, so I decide to connect a DVD and a VHF modulator... Weeee, a picture!! ![]() Suddendly, the EHT expired ![]() After 2 second the flyback starting to frying ![]() Immediatly I cut off the power. I can't tell you my thoughts in that moments ![]() I have checked 2 capacitor connected at cathode of the damper and at the cathode of the horizontal output tube (all good). Also I checked the cathode resistor of this tube, results 60 ohm instead 33... During the last startup of my Westy I seeing a little lightning in the 6W4. That tube is italian, made by Fivre ![]() I replaced for testing with a 6AX4, and now I have EHT. My flyback (and my heart) are saved I have a question: what is the good level of cathode current for my set? Last edited by Komet; 11-21-2011 at 06:35 PM. |
|
#2
|
|||
|
|||
|
hey use a Variac...between the set and the power outlet for excellent protection of your internal parts
it protects your house wiring too![]() from fire
|
|
#3
|
|||
|
|||
|
I remember seeing a picture of this set on Shorpy.com- a website of vintage photos. I went back and found it for you. Here is a copy of the text that was with the photo;
"Dad is waiting for the Westinghouse to warm up, and the channel selector is set at 7, WXYZ, Detroit. Other choices were 2, WJBK; 4, WWJ and 9, CKLW in Windsor, Ontario, where we lived. The console TV had doors that closed so that it looked like a piece of fine furniture. The TV was turned on for a show, and when that was over it was turned off. If you tuned in too early in the day all you got was the dreaded Test Pattern. A favourite back then was Detroit's own Soupy Sales. The antenna was up in the attic of our two-story home." |
|
#4
|
||||
|
||||
|
What a beautiful picture! I found this advertising of the Westinghouse italian importer.
![]() I and a my friend have found the cause of low voltage, was mounted a 6V6 instead of a 6W6. ![]() Replaced, I have wonderful video, but low power audio with distorsion and interference with color transmission. Also low snow effect. Tomorrow I recheck some voltages and all tubes. |
|
#5
|
||||
|
||||
|
Some progress. I checked if the audio trap is on 5.5 MHz used in Italy, and the interference in the sound is disappeared. Remains the problem of low power audio, I tried to connect my walkman to the volume control and I saw that the audio is low and distorted, the problem is in the power audio output. Tomorrow I check some capacitors, including the coupler capacitor between 6T8 and 6W6 and the capacitor between the anode and cathode of the 6W6
|
| Audiokarma |
![]() |
| Thread Tools | |
| Display Modes | |
|
|