Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 11-18-2011, 04:20 PM
vts1134's Avatar
vts1134 vts1134 is offline
Looking For Time
 
Join Date: Apr 2011
Location: Pittsburgh, PA
Posts: 1,534
Quote:
Originally Posted by Don Lindsly View Post
You state damper voltages all measure OK.
Er um, I took another extended reading today and found that voltage on two pins were jumping around on my meter. I don't have the worlds best meter, and it's digital so it can some times be hard to read. I found that the horizontal on the yoke, which is supposed to read 17Ohms according to the schematic, is reading close to 90Ohms. After removing the crt and peeking at the yoke it looks a bit melty.

Could that cause the voltage problem with the horizontal output plate voltage?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:00 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.