Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 11-15-2011, 01:29 AM
leadlike's Avatar
leadlike leadlike is offline
VideoKarma Member
 
Join Date: Apr 2008
Location: Lancaster, Pa
Posts: 956
When I worked on my 802, I had the same issues-I think a mica cap went bad inside that awful tuner, and killed signal input. Anyway, injecting video in the same manner you did, I only got horizontal lines. Injecting video at the video amp really messes up the horizontal frequency. Adjust the coarse horizontal control (You'll need a plastic diddle stick for this, I ground down a chopstick to fit, as a screwdriver throws off the frequency more) until a picture pulls in. Hope that helps!
Reply With Quote
  #2  
Old 11-15-2011, 05:06 AM
stusnyder's Avatar
stusnyder stusnyder is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: northeast Pa
Posts: 486
Quote:
Originally Posted by leadlike View Post
When I worked on my 802, I had the same issues-I think a mica cap went bad inside that awful tuner, and killed signal input. Anyway, injecting video in the same manner you did, I only got horizontal lines. Injecting video at the video amp really messes up the horizontal frequency. Adjust the coarse horizontal control (You'll need a plastic diddle stick for this, I ground down a chopstick to fit, as a screwdriver throws off the frequency more) until a picture pulls in. Hope that helps!
The problem is similar as you explained, although I got a feeling there probley more wrong with it. If I inject sync signal, I get the black horizontal lines that are shown in my B&K user manual.
Funny I usually play a trf radio when I'm down there working and usually get all kinds of squeeling noises out of the radio when I mess with the tv chassis.
I'll make up a non-metal screwdriver tonight and see what that brings.
Reply With Quote
  #3  
Old 11-15-2011, 10:17 PM
stusnyder's Avatar
stusnyder stusnyder is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: northeast Pa
Posts: 486
Quote:
Originally Posted by leadlike View Post
Adjust the coarse horizontal control (You'll need a plastic diddle stick for this, I ground down a chopstick to fit, as a screwdriver throws off the frequency more) until a picture pulls in. Hope that helps!
Got somewhat of a picture, as you can see, the horizontal has interference in it. Vertical locks good. Don't got much contrast control. Any sugestions where to go next?

Last edited by stusnyder; 03-14-2015 at 10:08 PM.
Reply With Quote
  #4  
Old 11-16-2011, 04:12 AM
leadlike's Avatar
leadlike leadlike is offline
VideoKarma Member
 
Join Date: Apr 2008
Location: Lancaster, Pa
Posts: 956
You won't have any contrast control. On this set, the contrast control raises and lowers the plate voltages on the tubes in the IF string. Since you've bypassed all that, twisting the contrast control will have no effect.

Try to inject a signal from a DVD player next. My BK 1077 produced odd results like that on my 802 project, while the video from my DVD worked fine.
Reply With Quote
  #5  
Old 11-16-2011, 01:25 PM
stusnyder's Avatar
stusnyder stusnyder is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: northeast Pa
Posts: 486
Quote:
Originally Posted by leadlike View Post
Try to inject a signal from a DVD player next. My BK 1077 produced odd results like that on my 802 project, while the video from my DVD worked fine.
Tried that, did not get any results. Might not had it hooked up correctly? I set up the 1077 for IF and it seems I'm getting something thru the IF stages to the video detector. Still got that blasted white vertical line though...
Not much left in there for stock components. All the mica's and a few resistors are still original. Getting something thru the tuner Rf-wise but not like it should be.
Reply With Quote
Audiokarma
  #6  
Old 11-19-2011, 09:14 AM
stusnyder's Avatar
stusnyder stusnyder is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: northeast Pa
Posts: 486
making progress

Making some progress

Last edited by stusnyder; 03-14-2015 at 10:08 PM.
Reply With Quote
  #7  
Old 11-19-2011, 09:56 AM
kvflyer kvflyer is offline
VideoKarma Member
 
Join Date: Nov 2006
Location: Fernandina Beach, FL
Posts: 1,133
Quote:
Originally Posted by stusnyder View Post
Making some progress
I would say you are!
Reply With Quote
  #8  
Old 11-19-2011, 10:19 AM
stusnyder's Avatar
stusnyder stusnyder is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: northeast Pa
Posts: 486
Quote:
Originally Posted by kvflyer View Post
I would say you are!
Thats video injected at the v15b tube dc restorer which is a 6h6.
I have to go thru the IF stages next.
Reply With Quote
  #9  
Old 11-16-2011, 10:34 AM
kvflyer kvflyer is offline
VideoKarma Member
 
Join Date: Nov 2006
Location: Fernandina Beach, FL
Posts: 1,133
Quote:
Originally Posted by stusnyder View Post
Got somewhat of a picture, as you can see, the horizontal has interference in it...
Could that be a bad capacitor in the yoke? They often have mica caps inside of the yoke. I don't have a schematic in front of me so I may be way off base...
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:13 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.