![]() |
|
#11
|
||||
|
||||
|
On monday night I reworked the audio slightly so the audio ground was correct, and redrew the schematic. This is the working update.
![]() This design has always had bad capacitive pickup from hands, rediculous lead lengths connecting the tube to the osc. cap and coil, and refused to oscilate if not connected to ground through my scope (which has always had it's ground connected to the cathode and probe connected to the plate). And so after doing the audio rework I pulled the parts for the osc. and modulation, and experimented again with osc. design using shorter lead lengths. My interpretation of bob's statement "bypass the B+ supply" did not work, but I came up with something that does work, and has killed the hand capacitance effect on the tuning cap and reduced it on the osc coil. It can now oscilate with the scope probe disconnected form the scope, but not with the probe disconnected from the circuit. Modulation is about the same, and is likely going to be experimented with more in the future. I intend to test the capcitance,resistance, and inductance of my probe in soon to see what parts will mimic it's effect on the circuit. this is the present design... ![]() Quote:
I want to keep this design limited to one tube if I can, and this is just so I have something good to listen to on my old tube radios. I don't have one bit of Tube or RF design knowledge. My forte is trouble shooting and repair, and being a sophmore EE student my only design knowledge relates to OP AMPs and is not very detailed (especially in the RF frequency range). I was thinking before you posted that the 0 modulation RF power should be around 50% so the output is high with modulation of a fairly high percent. I've used my non-equational knowledge of tube circuit design to get this far, and plan to keep playing with my design in hopes of improving it. This design came about from a "get enough monkeys with enough typewriters together and you get the work Shakesphere" type of scenario. I'm basically comeing up with things to try, testing them, and accumulating/refining/building upon the stuff that works or seems to work.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
| Thread Tools | |
| Display Modes | |
|
|