Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 10-25-2011, 12:12 AM
Charlie's Avatar
Charlie Charlie is offline
On Land
 
Join Date: Aug 2002
Location: Warren, TX
Posts: 2,582
Fuji, I don't know if he's still in business, but there was a guy here in Texas that was popular for rebuilding old tuners for a reasonable price. I think there may have been someone here on this site that used his services. Hopefully someone here will read this and know who I'm talking about and speak up.

For giggles, I did search and found this guy...

http://godard.delhi.la.us/qualitytun...le.htm#pagetop

This may be the person I'm thinking off. Give him a call... might be worth it.

Also, I think you may find it beneficial to get those circuit boards cleaned. Your photo shows a lot of dust in there. My Curtis Mathes had a good coating of dust like your set... wouldn't show a picture at all. I got in there with a small paint brush and a vacuum to get most of it cleaned up, and then some compressed air for places I couldn't reach. I was really surprised when I turned on the power and there was a pretty decent picture (had a weak green gun so that didn't get fixed till later).

I figure if there's enough dust in there to hide the color codes on resistors, then it's time to do some cleaning.

Had a similar issue with an old radio.... I could only get static from it. Put all new tubes in it and still only static. Pulled all the tubes again and cleaned out the dust around the tube sockets... then the stations came in just fine.
__________________
Charlie Trahan


He who dies with the most toys still dies.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:02 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.