![]() |
|
|
|
#1
|
||||
|
||||
|
Your set is a great find. I just picked up an RA112-A3 with exactly the same chassis except it has the 19AP4 round tube. This is my first set with the mallory "Inductuner". I did a google search on the inductuner and it seems it still is a current Mallory product!
http://www.duracap.com/inductuners/vhf400series.htm The CRT in your set looks all glass and so I thought it would be either a 17AP4 or a 17BP4? I have the same cabinet issues and it is too cold for refinishing so I'll concentrate on the chassis this fall. It will be interesting to compare problems with these chassis's. |
|
#2
|
||||
|
||||
|
Quote:
I figured our sets were about the same, mine also has the video out to color adaptor you posted about earlier. I'm sure you're probably aware that Phil Nelson has a most excellent RA113-B5 restoration on his website. http://antiqueradio.org/DuMontRA-113Television.htm. Part of the reason I went and picked this one up- It's Phil's fault. ![]() Would love to see any pictures of your RA112 set. |
|
#3
|
||||
|
||||
|
Thanks for the compliment. There's a lot to like about this TV.
I corresponded with Tom Albrecht about the CRT type, and his conclusion is that DuMont began with the 17AP4 but soon switched to 17BP4. On my set, there's a rather crude hole in the back cover, to make room for the slightly longer 17BP4 CRT. No dome over the hole, however. ![]() On his set, there is a shallow dome covering that hole, and the tube label inside the cabinet indicates 17BP4. I'd like to get a strong 17BP4A some day. Mine's watchable, but weak. Phil Nelson Phil's Old Radios http://antiqueradio.org/index.html Last edited by Phil Nelson; 10-21-2011 at 12:26 PM. |
|
#4
|
||||
|
||||
|
Quote:
I currently have my B&K 466 cooking the filament at 6.3V. I'll go test it after a couple hours baking. |
|
#5
|
||||
|
||||
|
I see Phil's set only has the one jack, where mine has both phono in and video out.
Here's a picture of my dome, jacks and hopefully you can read the serial# |
| Audiokarma |
|
#6
|
||||
|
||||
|
That dome is pretty crude, as in not very round. Plus the back is all perferated even upto the dome. Could be a later mod?
|
|
#7
|
||||
|
||||
|
Quote:
The tube label on the inside of my set specified 17BP4, so at least they updated the labels. The tube in mine was an RCA, with very strong emission. Perhaps that was a replacement, with a DuMont 17BP4 being stock. If this tube won't come to life, I don't think you will have much trouble finding another 17 inch tube. There are a lot of 17 inch sets out there that are far less worth saving than a DuMont. 17LP4 was a pretty common tube; not sure if it has the correct deflection angle. I'm not so conservative on rejuvination. Had good success with it several times, and don't recall ever making a tube a lot worse. Some tubes simply won't rejuvinate, but I suspect they are beyond rescue no matter what. If you're up to the good/bad line at 8 volts, however, you may be fine with a brightener now. I'm often surprised at how good the picture looks on tubes that test in the ? range. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|