![]() |
|
#8
|
|||
|
|||
|
the horz hold control does move it some, but not enough, and it never breaks sync even at the extreme end of the control. odd, its a coil but seem to have very limited travel. I cant see an external limit stop like on older zeniths where its built into the knob. Of course there is prob something inside the chassis. I only get about 180 degrees of adjustment so there has to be something.
Last edited by DaveWM; 10-10-2011 at 07:04 PM. |
| Thread Tools | |
| Display Modes | |
|
|