Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #28  
Old 10-08-2011, 02:55 PM
Mr Hoover's Avatar
Mr Hoover Mr Hoover is offline
VideoKarma Member
 
Join Date: Feb 2008
Posts: 65
Hi
I never really paid much attention to that part of the circuit as no problem with it..It's a very poor AGC system for sure...Make sure C19,30uF in the AGC circuit is ok or you might end up with some video modulation on the AGC line.

Playing with mine just now on a strong signal the video can be "moved" a lot within the screen by adjusting the normal line hold control at the rear.If it's
almost losing lock one one max setting that black curvy part as in your picture appears on the right side.Increasing the manual gain control (on a strongish signal anyway) forces the line oscillator to have a wider pull in/lock in range.

Hugh

Last edited by Mr Hoover; 10-08-2011 at 03:11 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:26 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.