Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Old 10-06-2011, 12:30 AM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
Didn't get far today, but I found that installing a 1-mfd cap for C34 didn't magically cure everything.

Say that one of those AFC diodes (X28, X29) is bad -- what type would I order to replace it? The parts list only gives a Sony part number (1T261), which didn't turn up anything in a quick search. These diodes are teeny-weeny, not the type of thing I have in the parts drawers.

I'm starting to suspect there's more going on than simply being off frequency. Watching it for a longer time today, the vertical isn't as stable as I thought, suggesting maybe a problem in the sync section or something else that affects both vertical & horizontal sweep.

Maybe I was too generous when I checked all the electrolytics and passed about half of them as good. A failure rate of 50% (at best) is pretty awful. If I had the right parts on hand, I'd be tempted to shotgun the rest of 'em. That's a crude approach, but you can't reach anything with a scope probe when the TV's assembled, and I can't see building custom board extender cables that I'll never use again.

Phil Nelson
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:56 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.