Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #28  
Old 09-17-2011, 02:40 PM
Steve McVoy's Avatar
Steve McVoy Steve McVoy is offline
VideoKarma Member
 
Join Date: Oct 2002
Location: Columbus, Ohio
Posts: 1,619
Here is what I'd try to localize the hum bars. Insert a signal generator into the antenna terminals, and set it to a VHF channel visual carrier frequency. Connect a bias box to the AGC line. Connect a scope to the video amp. Turn on the AM modulation on the signal generator and adjust the bias to produce a somewhat undistorted sine wave on the scope (I say somewhat because the AM modulation of most signal generators is not that linear). Turn off the modulation. Now connect a detector probe to the scope and work your way back, looking at the plate of each IF tube until you see hum on the scope.

A possible source of hum is the AGC line, by the way.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:02 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.