Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 09-05-2011, 06:49 AM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
I know that Rowe jukeboxes used tubes at least into the early 70's and I think they may have offered the option of a tube or solid state amp then into the mid 70's (until the selection circuitry began to be computerized). They still even used a 5U4 rectifier tube/7868 output tubes with a solid-state phono pre-amp.
I have a McGohan tube type PA amp which I think is from 1974, also a Bogen PA amp from '74, they also use 7868's.
Hammond organs with tubes were made up through '74 too.

There must be something about 1974 which really prompted most makers of all kinds of devices to drop tubes, maybe tubes themselves began to become more expensive due to less overall demand? Or solid state devices somehow became more cost-effective?
I know some PA/Jukebox makers still used tubes because they thought they were tougher and less prone to sudden failure than solid state devices. Although Seeburg began to use solid state amps very early, like around '63 or so.
__________________
Chad Hauris
http://www.youtube.com/user/retrochad
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:48 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.