![]() |
|
|
|
#1
|
||||
|
||||
|
Newer tvs are more electronically complex and contain more components than old ones. They are just miniaturized due to advances in technology, and therefore all circuity can be placed on one or two boards, instead of a large full chassis. similar to how my blackberry probably is more powerful than a 1960s computer occupying a whole room.
|
|
#2
|
||||
|
||||
|
Hi-
I don't equate overall reliability or quality with number of boards in a set. Now, a lot of old tubed tv's were circuitboard-less, and used point-to-point wiring instead. That, IMO, is a substantial point since the p-t-p's have the potential to be much more reliable when used with vacuum tubes. |
|
#3
|
|||
|
|||
|
Quote:
Of course the TVs that are made now have microchips which are very complex. Last edited by basil lambri; 09-02-2011 at 10:20 PM. |
|
#4
|
||||
|
||||
|
the first solid state tvs were similar in circuit complexity and features with the tube sets they replaced, or maybe even had more active elements, and designs became progressively more complex, adding better features and performance as technology progressed.
Even early solid state sets are more stable, require less adjustment,use less power, and offer better performance than most tube sets. One area you can really see this is color bars.. My tube sets have some overlap between them, my ss sets have crisp deliniation |
![]() |
| Thread Tools | |
| Display Modes | |
|
|