Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #29  
Old 08-25-2011, 09:22 PM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
In later sets after the damper circuitry had become standardized (damper tube in series with the flyback's B+ path), there was a little trick that was guaranteed to bump the width out a tad, while dropping the HV a corresponding amount. That was to take a disc ceramic cap of 82 mmf (82pf) rated at 4KV or higher, and connect it directly across the damper, cathode to plate.
Your set has a different damper configuration so i can't guarantee it would work, but it might. It might be worth a try sometime later if you have the chassis out for something else. It wouldn't hurt anything. Dropping the HV a smidgin would give a little more headroom for the arcy sparky 1X2.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:14 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.