Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Recorded Video

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 08-10-2011, 02:08 PM
ChrisW6ATV's Avatar
ChrisW6ATV ChrisW6ATV is offline
Another CT-100 lives!
 
Join Date: Feb 2007
Location: Hayward, Cal. USA
Posts: 3,552
Zenith Beta VCRs were all clones of Sony models. That one looks like a clone of the Sony SL-2500, which was the first low-profile, stereo-component-style VCR that I remember. Here are some pictures:

http://www.betamaxcollectors.com/son...elsl-2500.html

The power supply on this should not be too complex, so basic troubleshooting techniques should get you started, even without that Sams manual. (Trace from the power cord and switch to see if it uses a power transformer first, and if it does not, plug it into an isolation transformer to do your repairs. Check voltages from the transformer output, then from the whole power supply which may have its terminals marked where they connect to other boards, and so on. Do visual checks on electrolytic capacitors, but ideally use an ESR meter on each one in the PS, as a start.)
__________________
Chris

Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did."
Reply With Quote
  #2  
Old 08-10-2011, 02:30 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Once you do get this deck running, I wonder how you'll test it, since Beta videocassettes are difficult (if not downright impossible) to find nowadays.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:22 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.