Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 07-15-2011, 09:15 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
if it goes to 30kv with the brighness down, then I would guess the shunt tube is not operating properly (should be clamping it) or the HV is just set too high.

did you check the cathode current of the 6Bk4? I am not sure about that early of a set, but would guess the current should be between .5 and 1.5 ma depending on brighness and contrast settings (higher ma with CRT dark).

Just a guess here but maybe you just have the screens set too high. I would back them down so when the brighness is fully CW the pic is just a bit brighter than normal viewing, set them all for good grey scale, then adj the drives to get good whites, set the HV for 23-24kv check the shunt current again and see if it varies with screen brightness and if the HV holds steady.

The fly can only produce a max power output, the shunt clamps it down if the CRT is not drawing too much, and lets off when the CRT needs more.

if have the CRT biased incorrectly or the G2 voltage is too high then the CRT will draw all the flyback energy leaving the shunt nothing left over to clamp, if the draw is more than the max, the HV will drop. From what I gather the optimum is clamp .5ma on a dark screen this way there is always some flyback in reserve so the HV will not drop.

If the shunt current is high even in a bright screen, then there is a problem in that circuit. there is not a lot in there, I would check the resistors 1st then the pot then the caps in that circuit, in that order (after tube sub that is).

good luck with it.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:14 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.