![]() |
|
|
|
#1
|
||||
|
||||
|
Sure the horizontal wave coil has a correct looking waveform on it? You should have equal peaks.
__________________
Evolution... |
|
#2
|
||||
|
||||
|
I think it's real close. This is what it currently looks like with the fine cross hatch pattern. This is looking at point I on the schematic.
|
|
#3
|
|||
|
|||
|
To offer a WAG, possibly leakage between the V and H windings of the yoke, with the potential for developing into the classic trapezoidal-shaped raster. oc
|
|
#4
|
||||
|
||||
|
I wondered about that. I guess I will need to find a new yoke in order to test that theory. I also wondered about the cap directly across the one yoke winding. I have not replaced that. I think it's rated at 2500 volts.
|
|
#5
|
||||
|
||||
|
Here's what the Horz drive waveform looks like, and a screen shot that shows the horz wave over on the far left (look where it says QVC price $13.98 in the black bar). I think I can actually see the small dip in the bottom of the drive waveform? Also some ringing way at the bottom. My problem is I don't know how much of this distortion is considered normal for this set.
Last edited by Kevin Kuehn; 07-03-2011 at 01:09 PM. |
| Audiokarma |
![]() |
| Thread Tools | |
| Display Modes | |
|
|