Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #20  
Old 07-02-2011, 12:19 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
with everything hooked up, turn the brightness all the way down, read the HV at the anode of the CRT, and then read the focus voltage at the CRT. the focus voltage will be at the pin that is in between the other pins on the crt, (there are open spaces between it and the others). You can read this by tracing the black lead from the CRT Plug back to the fly and touching the HV probe there.

after doing this try it again with the shunt tube disconnected (the top plate cap removed, be careful the plate cap has full HV so make sure its not near a ground.

what are the voltages of the CRT HV anode and CRT focus with with the shunt tube connected and disconnected. brighteness all the way down.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:31 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.