|
Hated those tuners! I was working at RCA/GE/Thomson at the time. It was shortly after Thomson bought the business from GE. They wanted us to used the Thomson tuners. They were not so hot either. The only way we could keep the tuner design was to put it on the main board. I was working on the CTC-169 CTC-170 and CTC-172. The first ones were really bad as they used the tuner wrap for the ground. So the bad solder would make the vertical go out and lots of other strange things. The newer generations only had tuner problems. The board material came rolled up, one long piece. Can't remember what it was called. There was also a class action suit on the XS stereo. I don't remember how that turned out. I did work on the fake stereo IC in the CTC-176. Was one of the worst thing I ever had to work on. There were a few old timers that really had a bad attitude and thought they could push crap on an unsuspecting public. With out the corresponding variable lowpass and variable gain matching the encoding the L-R wandered all over the place and so did the separation. We did make some pretty good things. I can tell you I designed the 5 watt and 10 watt analog audio modules that replaced that crappy digital stereo IC. Anybody see those early ones with the attenuator that switched in half way up the volume curve?? The signal to noise changed over 20 dB and it was really noticeable..
|