Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 06-21-2011, 09:50 AM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
There's a quickie way to verify whether (or not) the fly is putting out. Remove the 1X2 and using a well insulated screwdriver, bring the metal tip of the screwdriver close to the plate cap connector. You should be able to draw a hefty RF 'air arc' a quarter to half-inch long onto the screwdriver. If you get the arc, that tells you everything 'upstream' is working.

I was thinking maybe a hard-leakage path from the 1X2 filament winding to ground mighta developed, based on your earlier statement of hearing a sizzling noise. Just for the heck of it (with the set off), using the highest ohms scale on your meter, measure from ground to the 1X2 filament winding. It should read infinity (open circuit). If it reads anything at all, it would indicate an insulation breakdown that's lugging down the HV.

oc

Last edited by old_coot88; 06-21-2011 at 09:59 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:03 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.