![]() |
|
|
|
#1
|
||||
|
||||
|
All the tubes in the horizontal test good(I forgot to check the focus rect. though) with the regulator peging my tester.
Quote:
You think with all the cramped anti-Q shops i've been in since I was a little kid(I've done worse than that in my early days) that I'd learn to watch where I step!The sparks were like on the out side of the HV cage door and only happened twice in rapid succession. If he gets the RCA he will be saveing me from my self, but fathers day circumstances may have me there on a different day. I'll give ya a day of twos notice once my scheduel is set. The vert is working, but I'll probably get that spare tube while I'm there(just to be safe). Bgadow, I think I'll take you up on your offer, there is a local college that also has it, but I have to photocopy it, and that is not my favorite way to get the sam's. Tom C. |
|
#2
|
||||
|
||||
|
Quote:
Hmm, sounds like a wire lead might be touching something it's not supposed to. That, or a failed component of some sort. It's also possible it's nothing at all, of course. First time I started the CTC-7 and the 21-CT-55, I heard a few loud snaps but it never happened again. I think sometimes there are paths to ground over dust or other crap that gets blasted away when HV comes up. Best thing you can do is watch for it happening, and trace it to it's source.
__________________
Evolution... |
![]() |
| Thread Tools | |
| Display Modes | |
|
|