![]() |
|
|
|
#1
|
||||
|
||||
|
I checked all the tubes and resistors. Three weak tubes, and the 5V4 was replaced with a 5U4. A few resistors too high in value, and of course a chassis full of wax capacitors and bad electrolytics. I had most of the replacements for the wax caps in my kit from Just Radios, picked up the resistors and a few caps locally, and ordered the rest from Digi-Key tonight. I also picked up one tube locally and stole a couple of others from a beat-up 630TS I have as a some-day project here. The fuse is odd; it is in line between one filament connection and another, in this parallel-filament set. Who knows why it would have been added?
I will start the re-capping in the next few days. Here is the "before" picture:
__________________
Chris Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did." |
|
#2
|
||||
|
||||
|
keep posting, I've got one that I should probably get to pretty soon.
|
|
#3
|
||||
|
||||
|
Quote:
Phil Nelson |
|
#4
|
||||
|
||||
|
Quote:
|
|
#5
|
||||
|
||||
|
Quote:
I do not recall seeing a filament fuse on this set. |
| Audiokarma |
|
#6
|
||||
|
||||
|
The 5U4 was in the socket when I got the set; I have a correct 5V4 that I will install after the chassis work.
The picture with the same fuse I have is from an 8TS30 that Steve Pielock restored and described on the Antique Radios forum. Here is the picture link: http://i249.photobucket.com/albums/g...CIMG6905-1.jpg I hope the flyback has not already been damaged from having that 5U4 in there...
__________________
Chris Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did." |
![]() |
| Thread Tools | |
| Display Modes | |
|
|