Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 06-13-2011, 08:56 PM
6GH8cowboy 6GH8cowboy is offline
VideoKarma Member
 
Join Date: Mar 2011
Location: Palm Beach County Florida
Posts: 306
Just re-tin the last 1/4 to 3/8 inch of the leads and don't move them. Keep the heat away from the glass. Gently position them so they will naturaly fit into the pins and re solder. A small clean piece of copper wire will help wick the solder into the pin. If silicone seal is used to secure the base use sparingly and keep off the wires as the acetic acid from curing is not a friend to wire. If the tube turns out to be bad for some reason the would be very good practice anyway.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:13 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.