Quote:
Originally Posted by andy
Are you sure about that? I'm almost sure my 5100 doesn't have instant one. I thought the quick warm up was due to the unusual directly heated cathodes in the CRT.
|
I just did a "cold start" on my 5000 and 5200 (they had been unplugged for months) and both came up to full brightness in about 5-8 seconds. I suspect that these are both using directly heated cathodes (180mW or 1/4W)
jr
OTOH, my KV 9000 just took about 20 seconds from a similar cold start, for sure an indirectly heated cathode. If left plugged in the 9000 picture will come on in about 5-8 seconds, indicating that "standby" power is applied to the CRT heater.
The 5000 and 5200 still take 5-8 seconds if left plugged in, so no indication of "standby" CRT power (or perhaps that circuit is not functioning in my 5000 series sets).