Quote:
Originally Posted by jhalphen
Much skill is needed to rebuild guns and sometimes an entirely new gun must be assembled from scratch re-using the original parts: Wehnelt cylinder, G1/G2/G3 anode assemblies, etc. X/Y/Z positionning of the parts in space must match the original specs to within fractions of a millimeter so that the electron optics performance are satisfactory. This is no mean feat, and for color CRTs (Think 15G..) the amount of work is tripled.
|
The guns on the 9" and 12" pre-war EMI CRTs are a particularly complex hexode design. Not sure how much needs to be dismantled to replace the cathode/heater assembly.
I hadn't heard about the EHT connector problem. Possibly because the 6/6 that I had rebuilt in 1986 was pumped cold. There were 2 reasons for this. The CRT was too long to fit in the available oven and the guys doing the glassblowing were worried that the stresses caused by heating could crack the glass. I'm not sure about the stress problem, the heating might well anneal the glass and make it stronger. I admit that for that project we had a choice of 5 dead EMI 6/6 CRTs. The choice was made on the basis of which glass had the fewest bubbles and other defects.