|
|
|
|
|
#2
05-30-2011, 01:24 PM
|
||||
|
||||
|
After checking the fit, I secured the steel ring that holds the top of the cone on. I used 3 screws for now. I soldered the voicecoil wires back on the transformer. I got good voicecoil movement and no binding. Next step is to put the remaining screws in, and recap the radio and hook the speaker back up. I did check it with a battery to make sure it will work.
Last edited by stusnyder; 03-14-2015 at 11:05 PM. 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
