Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 05-29-2011, 12:39 AM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Back when stereo audio for TV was developed, around 1984, RCA used, in addition to the regular video IF strip, a special video IF strip for the sound. One peak for the picture carrier, and another peak for the sound carrier. The "video" detector just beat these two carriers together to get the 4.5MHz sound IF, without incidental bandwidth tilt, which can cause that buzz, which will trash stereo decoding. There's no Nyquist slope at the picture carrier, like regular video IFs have.

That Sony with the choice of sound IFs sounds quite interesting. I suppose the tuner was a PLL based on a crystal to yield an accurate local oscillator frequency, so a split sound system would always work. They could have used the FM detector to provide some automatic frequency control correction (probably to induce a slight shift in frequency of the crystal reference oscillator, to shift the local oscillator as a result of the PLL).

Oh, I see VK plants web page links and $ coins on words like "Sony". Well, if the money Sony and others pays for it helps keep VK on the air...
__________________
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:12 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.