Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 05-24-2011, 02:31 PM
VintagePC's Avatar
VintagePC VintagePC is offline
Tube bug got me 05/2010
 
Join Date: May 2010
Posts: 535
Quote:
There is only one lead from the yoke on the vertical side. What would I do with the other lead on the variac?
The other side of the vertical is connected to ground according to the schematic (most likely chassis ground somewhere.)

you _SHOULD_ be able to connect the neutral side of the variac output (Be careful that you do really have neutral!) to the chassis, and then the HOT side to your coil wire.

HOWEVER, before you do that, double-check that your chassis is actually grounded or connected to line neutral. If your set has the possibility of a "Hot" or floating chassis voltage (i.e you do NOT read close to zero volts when measuring voltage from chassis to neutral in the wall plug), DO NOT DO THIS - it could trip your breaker!

Since you know the transformer is good though, if driving it with the variac produces no deflection, you can be almost certain the coils are the problem... and the test you're unsure about will produce little extra information.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:56 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.