Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #20  
Old 05-23-2011, 05:05 PM
Reece's Avatar
Reece Reece is offline
VideoKarma Member
 
Join Date: Jul 2004
Location: Cleona, PA
Posts: 2,178
Without a picture it's hard to say about straightening the dial face, but if it has a foil face on cardboard you could do this: thoroughly dampen the cardboard back in the affected area. Then clamp the dial between pieces of wood, using a piece of waxed paper on the front foil side. Leave it a couple of days to dry. It should straighten out. Then you could glue a thin layer of wood, 1/16" or 1/8" thick (hobby store like Michael's) to the back and clamp to dry. I've straightened cardboard rear covers like this and they came out fine, even without reinforcing with anything else.
__________________
Reece

Perfection is hard to reach with a screwdriver.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:44 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.