![]() |
|
|
|
#1
|
||||
|
||||
|
From what I read, they did have their own station. Rees-Mace from London UK did make radios for Wanamaker. I could not find any other manufacturer that supplied them radios. All I know is it's a model 55. Manufacturer unknown.
|
|
#2
|
||||
|
||||
|
I started with this little guy, the tubes are a 43, 25z5, two 77's, and a 78.
The power cord was cut at some point. What puzzles me is a few things. First it seems like the power cord wires connect to pins 5 and 6 on the 25z5. The volume control is a combo with the power switch. one side of the switch goes directly to the chassis, and the other wire leads over to the 25z5, but is cut. If you look at the first pic, the leads sticking out from the chassis is what I think was the power cord. There is a screwdriver head pointing to the wire that goes to the power switch. The 2nd pic is a shot of the power switch, screwdriver pointing to the wire in question. I can not find any info on this radio at all. No schematic, no nothing. Any ideas from anyone??? |
|
#3
|
||||
|
||||
|
If there's no power resistor to drop the powerline voltage to the heater string, this radio may have used a "curtain burner" power cord, one with resistance wire to drop the voltage. This cord would get warm. And probably decayed so bad that it was cut off.
__________________
|
|
#4
|
||||
|
||||
|
Quote:
I'm pretty sure 120 v to that tube would not be good
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|