![]() |
|
#7
|
||||
|
||||
|
Look anything like this? http://www.talonix.com/images/WMF5.6.jpg
or is is rectangular/box shaped, like Belimiter Fuse Resistors? The Belimiters were all merged into two RCA part numbers - one 5.6 ohm, and the other 7.5 ohm. Your RCA part number is one that was merged. I don't have my RCA guide here with the part numbers, but can get them if you need them. Only replace a fuse resistor with another fuse resistor, or similarly sized (ohms/Current Rating) inrush limiter. Cheers,
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! Last edited by Findm-Keepm; 05-16-2011 at 08:31 PM. |
| Thread Tools | |
| Display Modes | |
|
|