Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 05-10-2011, 09:21 PM
Penthode's Avatar
Penthode Penthode is offline
VideoKarma Member
 
Join Date: Jun 2009
Location: Kitchener/Waterloo Ontario Canada
Posts: 1,463
The high voltage on the 5U4 cathode suggests that one of the resistors in the chain may be open.

If you check the resistance from pin 8 of the 5U4 to chassis, it should measure about 6400 ohms. If you check the resistance of the entire divider chain from pin 8 of the 5U4 to the metal can of C147 (located under the chassis under the power transformer), it should measure 7700 ohms. These resistances may vary +/- 20% but if they are considerably higher, then one of the resistors is likely at fault.

Lastly, try measuring from the metal can of C147 to chassis and it should be 1300 ohms. A short circuit to chassis of the C147 can could also lead to a high voltage on pin 8 of the 5U4.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:43 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.