Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 04-28-2011, 12:51 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Like what everyone else said, no problem here. The black band on some older paper caps identifies the outside foil connections and some caps even say "outer foil" by the band. In some circuits, it may make a slight difference in performance if the cap is wired backwards; but, there won't be any chance of it blowing up or frying other components.

An electrolytic cap, usually found in values of 1 uf and above, are a different story. Unless you are dealing with a non-polarized electrolytic cap, you will need to observe correct polarity. Standard polarized electrolytic caps have some type of indication as to the negative lead (usually an arrow with a "-" sign inside the arrow). If you install an electrolytic cap backwards, it can violently explode, fry other parts, and/or cause severe performance issues. In vintage electronic work, the most common place to find non-ploarized electrolytic caps is in the speaker crossover network in stereo's, phonograph's, etc.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:13 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.