Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 04-19-2011, 11:20 AM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
Quote:
Originally Posted by carlpete50 View Post
Maybe I should check it with all the lights out, when it's dark outside and remove the metal covers.
Yes, I would check again in total darkness. If you see arcing at the HV capacitor solder joints, etc., you can try insulating them as Tom suggested. I have used "Corona Dope" by GC Electronics for such purposes. It's available from http://www.tubesandmore.com/ and other suppliers.

You also want to make sure there are no sharp points -- clipped lead ends, solder tails, etc. -- on such joints.

If the arcing source is not immediately obvious, a plastic or rubber listening tube held to your ear may help locate it.

It's possible the CRT itself has a problem, but I wouldn't mess with its base until you had eliminated other possibilities.

Don't run the TV for long periods when it is arcing.

Phil Nelson

Last edited by Phil Nelson; 04-19-2011 at 02:13 PM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:21 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.