Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 03-14-2005, 01:43 AM
yagosaga's Avatar
yagosaga yagosaga is offline
VK Member
 
Join Date: Jan 2005
Location: in Braunschweig
Posts: 690
I had trouble with wrong voltages and currents in the horizontal unit too. Read

http://audiokarma.org/forums/showthr...t=30364&page=5

and the following postings. I have renewed all the resistors on the horizontal oscilltor board. Some of these old resistors are crumbly. After renewing I got the correct values. But be careful with soldering. I had a short between grid and screen of the 6CB5 with fatal consequences.
Check R603 too. In my manual it has 150K, not 100K like in yours. In the set I found 90K and changed it with 150K.
BTW: Is A.G.C. ok? The first anode of the 6U8 should have -30 thru -70 volts. (Without signal input 0 volts).
Reply With Quote
  #2  
Old 03-16-2005, 08:48 PM
Whirled One's Avatar
Whirled One Whirled One is offline
VideoKarma Member
 
Join Date: Apr 2004
Posts: 375
Quote:
Originally Posted by yagosaga
I had trouble with wrong voltages and currents in the horizontal unit too. Read

http://audiokarma.org/forums/showthr...t=30364&page=5

and the following postings. I have renewed all the resistors on the horizontal oscilltor board. Some of these old resistors are crumbly. After renewing I got the correct values. But be careful with soldering. I had a short between grid and screen of the 6CB5 with fatal consequences.
Check R603 too. In my manual it has 150K, not 100K like in yours. In the set I found 90K and changed it with 150K.
BTW: Is A.G.C. ok? The first anode of the 6U8 should have -30 thru -70 volts. (Without signal input 0 volts).
Say, thanks for pointing all of that out-- I had earlier been following your saga with the CTC-5 Aldrich with interest, but had forgotten that you too had troubles in the horiz osciallator section. I had a few "crumbly" resistors too, though the PC boards appear to be in good shape. Right now, I'm still waiting for some new caps to arrive that I ordered, but should have them in a few days. [BTW, yes, I know that C606 should not be replaced with a ceramic; I only did that as a test to confirm that it would indeed raise the oscillator frequency. Ceramic caps are not stable enough for this sort of timing application...]

Since old_tv_nut posted the schematic for the CTC-5A (through 5H) chassis version (the "Special"/"Super" models), I may as well fill in with the scematic for the CTC-5N (through 5AB) chassis version (the "Deluxe" models) as found in my edition of the RCA manual. Note that the tuner schematic is not included in this diagram.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:48 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.