Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 04-02-2011, 10:20 PM
JCFitz JCFitz is offline
VideoKarma Member
 
Join Date: Sep 2005
Location: Willards,MD
Posts: 411
Quote:
Originally Posted by marty59 View Post
Just wondering, are the pins tight and clean? And worse case, could the socket itself somehow be removed from the cup? Are there some unused pins that could be removed?

Phil Nelson addressed a ticking rectifier issue on his Philco Miss America...
I kinda wonder if I ruined it. See this chassis was covered in cigarette tar and the entire rectifier area was black.I cleaned everything in pure ammonia to cut the tar it was so thick.See how clean it is now? just wondering if the ammonia chemically affected this cup or took off some kind of coating that prevented the ticking.It didn't do this when I first got it working but I had a drive problem(bad drive trimmer) and a miswired screen grid cap(going nowhere on the ground end) so my hv was a little low.as soon as I fixed the screen cap ground and no longer had glowing plate problems so I could finally let it run for long periods my hv came up enough to get the ticking(started right away) and it's been there ever since.It didn't do it before the recap or cleaning either but that trimmer was bad so hv was lower.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:24 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.