Quote:
Originally Posted by ctc17
One other thing to try.
let the set warm up good, make sure the color level is up, run the fine tuning up, now tweak the horizontal hold from one side to the other. till it looses lock on both sides. If color pops in or you get the floating rainbows while moving the horizontal hold its a fairly good indication the crystal has drifted.
Does the fine tuning even work? These are well noted for the fine tuning plastic gear cracking and not turning.
|
WOW!

I have never gotten this much attention and advice about any set, but thanks to everyone just the same. This post will touch base on various comments and ideas given in the last few posts by different members. First, the fine tuner works just fine. Next, I checked all color related tubes and all three video stages. One of the first rules of troubleshooting is a good use of the senses and looking and sometimes moving things around a bit like tubes, wire connectors, and potentiometers, so I have pretty much covered the easiest but often overlooked possibilities. The visual inspection is why I mentioned the seemingly cracked spool of the horizontal efficiency (linearity?) coil, but I was not indicating that I would never start turning coil adjustments knowing that the set was working almost perfectly up to a point. I will say that I can't make the horizontal hold lose lock in both directions; only around 3/4 clockwise, but it locks steady. I don't want to elaborate too much on the fact that some small issues may lie in sections other than color producing sections so the focus for now remains getting color back.
I am thinking about this crystal that CTC-17 mentioned because from the get go the color took a few minutes of warm up time to come in, then it seemed stable. The last time it produced a color picture, nearly a half hour had passed and I was ready to give up for the evening when the nice color suddenly popped in. Last night I could not achieve any color other than some strange effects when I tweaked the color killer a bit. I just set it back where it was because again, adjusting a bunch of things that don't need adjusting would be ridiculous, but I am sure that a lot of people make that mistake.
I know that capacitors can be unpredictable in old sets, but frankly I have found more old paper foil capacitors to be problematic than electrolytics in my adventures with old 40s-50s black and white sets. So far all of the cans run nice and cool as does the power transformer, so for the moment I feel OK about the electrolytics, but I have not checked any of them. I only have a good Simpson analog meter for that which I know is not a "for sure" insurance that a capacitor is good or bad. Believe it or not, the main electronics supply house in this area has capacitors that are NOS and are probably nearly as old as the ones in this set. I don't see any paper caps underneath; only black or brownish non polarized "orange drop" types. I don't know how prone to failure those are.

I know that this subject is always sort of up in the air; again I am trying to stay focused on color for now.
I have mentioned before in other posts that I owned a few color "roundies" as a kid for daily use just because I liked the way they looked and generally thought that the picture was better. Back then I did little or no repair on the color sets; my interests then and for years to come was primarily old black and white sets. So, I am more new to the vintage color TV operation and repair than to repair in general. I have been messing around with tube type radios and TVs for nearly 30 years. Admittedly, no formal training was involved other than one year of HS electronics until I was lucky enough to enter the electronics degree program at the local community college where I am to graduate in May. One of the things that I love about electronics is that you never stop learning! If you do, then pick up a Boolean Algebra book and start racking your brain with digital logic!

Thanks to everyone for pitching in some opinions and ideas. It is great that there are sites like this where knowledge can be passed along that is not taught in any school!