![]() |
|
#11
|
|||
|
|||
|
Let the set run for a few hours, does the color pop in? Try running the fine tuning up to the edge and see if you get the barber polling rainbow or if the color pops it.
One of the common things I run into is the color crystal will take a dump a few days after returning to service. Usually they lock in as they heat up. Defiantly dont turn any cores. I have aligned several color sets and its not something you want to mess with unless you have the equipment and practice. If you try the things Dave mentioned and you dont get anywhere I wouldnt hesitate to change the crystal. Just based on what I have seen with the 50 tube color sets I have. One other thing to try. let the set warm up good, make sure the color level is up, run the fine tuning up, now tweak the horizontal hold from one side to the other. till it looses lock on both sides. If color pops in or you get the floating rainbows while moving the horizontal hold its a fairly good indication the crystal has drifted. Does the fine tuning even work? These are well noted for the fine tuning plastic gear cracking and not turning. Last edited by ctc17; 04-02-2011 at 12:02 AM. |
| Thread Tools | |
| Display Modes | |
|
|