Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 03-29-2011, 08:31 PM
charokeeroad's Avatar
charokeeroad charokeeroad is offline
John Q
 
Join Date: Sep 2010
Location: Southern California, IE
Posts: 644
Quote:
Originally Posted by pugs5061 View Post
I am restoring the same set and I have been scrubbing and waxing and scrubbing and waxing for what seems like forever. The bakelight is just plain faded like yours. Yours looks great and I am probably going to end up staining mine after seeing your results. Two questions for you though. Not being able to see it in person how close a match do you think you had with the red oak? Would something with a little more brown be in order if I wanted stay closer to the bakelight color? Secondly, I'm thinking I'd want to try for a higher gloss finish. If I used a high gloss Poly to achieve this, I'd like to here your comments.
Thanx,
Bret
Pugs5061. I know what your talking about. No matter how hard or long you scrub and wax you can't get the Bakelite color back. I used Red Oak for a first coat and that's the color you see on the pics that were taken outside. Like you I wanted to get it a little darker so I went back over it with Colonial Cherry . I think you could also try Red Mahogany. The finished pics show a color more like Bakelite.

The staining part is about as easy as it gets. Just dip a cloth or paper towel into the stain and go to work. I didn't let any stain build up and the cabinet just seemed to take as much stain as it needed to give it color uniformity. I used stain without poly included. I was shocked at how good it looks with just the stain. I did wipe it until it got smooth and a bit of a shine developed. I was tempted to leave it like that but I also wanted to see what a poly finish would look like so I pushed on.

The poly finish was a little more tricky. I first shot water based poly and I wasn't really happy with the way it worked. There could have been a couple reasons for that. 1 I don't have a paint booth and 2. I don't paint enough with a sprayer to know exactly how much pressure to use or what other factors to adjust to get it perfect the first time. The finish was a little rough and when I sanded (I used one of those really fine sponge sanding pads that you can get at Harbor Freight 10 in a pack) it I wore through the poly quicker than I was expecting. When you wear throught the surface of the poly your S.O.L. I applied a second coat thinking it might fill in but it didn't. I removed the water based poly and shot it with reqular oil based poly and it worked 100% better.

I don't see why you couldn't use a simi gloss. I personally won't use a high gloss again. My experience tells me that it take a pro to reallly apply it well. My attempts to use high gloss ended with me throwing a quart can away in frustration.

I'm not sure about the original Bakelite finish. It looks like it has some kind of plastic film probably lacquer on it but I think poly gets it about as close as one can get to the original finish. I want to try lacquer some time but it's getting harder to find.

Here's a good writeup on finishes.
http://polyurethanevarnish.com/

Good luck, I hope you'll post some pics of your finished set.

John

Last edited by charokeeroad; 03-30-2011 at 08:52 AM.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:27 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.