Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Recorded Video

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 03-01-2011, 10:50 PM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
Quote:
Originally Posted by Eric H View Post
I found what I think is a European model Sharp VC-NF01 VCR, it will play PAL, NTSC and SECAM...
Looks to be a Japanese domestic unit with the Japanese writing and "100V" voltage rating on the back panel. It will put out RF on probably 30 - 36 UHF. That's what the screw in the back next to the "Channel" does. The Test switch makes a video test signal, lets you tune it in on the TV. Haven't seen one of those Sharps, but I sure saw a bunch of the Samsung SV-5000s with power supply problems, electrolytics in SMPS a common failure, and more than a few with an eeprom chip that failed. Few mechanical problems. The Samsung converts one format to another, PAL tape to NTSC output for example. Aiwa made a couple of multi-standard decks I saw a lot of too, the HV-MX1 and later the HV-MX100 both convert formats like the Samsung.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:06 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.