Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-14-2011, 02:01 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by peverett View Post
The two main difficulties are 1(removing the PC boards from the chassis as they are soldiered down(with no access to the back of the board)
I just wimp out on a situation like that and connect to the old cap's leads with J hook style. Maybe use a mandrill, using a small nail just slightly wider than the old cap lead, wrap the new cap's lead around it in a spiral pattern and then bend the lead 90 degrees to make it a straight butt connection with the old lead on the circuit board. This avoids having to attempt to remove the circuit board, and damage or mistakes with associated wires with the board. Do it neatly and it won't be that ugly.

Quote:
and 2(replacing the multi-cap/multi-resistor modules that were in use at that time.
Above j hook method isn't usable for that, unfortunately. As you'd probably have less than 2 mm of lead to work with, trying to solder to that without unsoldering the lead from the board backside would be dicey...
__________________

Last edited by wa2ise; 02-14-2011 at 02:08 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:19 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.