Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 01-27-2011, 12:29 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by Microtrol View Post
Hi all,
I fired up the philco after recapping and the i could not get the picture into focus. I found that the focus control had several dead spots so I replaced it but still cant get the picture to focus cleanly, any suggestions, thanks
Brandt
Do you have a magnetic focalizer unit handy? The kind that RCA and others used in 1952 and newer sets. If so, try it instead of the original. Also, if the set has the original Philco CRT it has a single magnet ion trap. If you use a different make CRT make sure you have a double magnet ion trap on hand.
Reply With Quote
  #2  
Old 01-27-2011, 01:48 PM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
Question

Quote:
Originally Posted by dieseljeep View Post
Do you have a magnetic focalizer unit handy? The kind that RCA and others used in 1952 and newer sets. If so, try it instead of the original. Also, if the set has the original Philco CRT it has a single magnet ion trap. If you use a different make CRT make sure you have a double magnet ion trap on hand.
The Philco 12LP4 required only a single field magnet? I've certainly seen many 12LP4s with a single field magnet but I could never figure out if these were replacement magnets or factory installed.

John
Reply With Quote
  #3  
Old 01-31-2011, 07:17 PM
Microtrol's Avatar
Microtrol Microtrol is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: So Cal
Posts: 69
hi all,
tried several thing from all of your great suggestions and ended up finding out the focus coil was not working. Even through the coil ohmed out right, i couldn't get the focus to come in. I had a spare coil from another set and after exchanging it, this is the first picture i got up. Thanks for all you help as this is a great site
thanks again,
Brandt
Attached Images
File Type: jpg photo.jpg (34.1 KB, 35 views)
Reply With Quote
  #4  
Old 02-01-2011, 04:00 PM
dreyfoos dreyfoos is offline
VideoKarma Member
 
Join Date: Mar 2005
Location: Castro Valley, CA
Posts: 64
Hi Brandt,

Glad to hear (and see) that you have those nice sharp scanning lines. Now I'm wondering what it is about the transplanted focus coil that did the job when the one that ohmed good didn't. There's always the matter of getting proper position of the coil behind the yoke and relative to the innards of the CRT. But what else could account for the fix? Was the substituted coil the same part number as the original or was it just a lucky grab? I wonder now whether almost any focus coil from a 12LP4 equipped set would do the job?

I'll bet someone here can clear this up

Roger
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:57 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.