Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 01-26-2011, 11:06 AM
dreyfoos dreyfoos is offline
VideoKarma Member
 
Join Date: Mar 2005
Location: Castro Valley, CA
Posts: 64
Hi Brandt,

Some three years ago, I had a focus problem on one of my Philco 50T-1403's and sought help here from my fellow collectors. It became a fairly long thread which looked in depth at the parameters that govern focus - with emphasis on what Philco was using at the time. The name of the thread was "Philco 50-T1403 with focus problem."

http://www.videokarma.org/showthread...+focus+problem

Don Lindsly was expecially patient and generous with his help and we finally got my focus up to 100% - on the money.

Your Philco model may have the same combo of both permanent magnet ring and electromagnet coil that mine used. In any case, I hope that the old thread helps you move forward in solving your focus problem. I still have questions as to the effect of 60 years of heat and hard knocks that might affect the strength of the permanent magnet ring and hope to get back to it some day.

Good luck!

Roger
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:42 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.