![]() |
|
#11
|
||||
|
||||
|
Ah, good to know.
I pretty much rebuilt these the same way as Phil Nelson. I did drill a small hole for the negative lead though. After feeding the lead through, I wrapped it around the old terminal and soldered it. Originally, it made contact with the can just by pressure. The decals were already worn off one can so I didn't mind polishing them up. While doing so, I noticed that one can is stamped 61115 and has a flat top while the other is 61116 and has a rounded top. The 61116 can also had some liquid remaining inside so maybe it's a really old replacement ?
Last edited by bandersen; 01-26-2011 at 04:12 AM. |
| Thread Tools | |
| Display Modes | |
|
|