Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 01-17-2011, 02:34 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
took a break from the TV for a bit to concentrate on the SS stereo. pots needed some cleaning. AM was not working right. It was very odd, would birdy and could be made to work if I turned it off and then on and carefully manipulated the selector. had some odd voltages in the AM section. Noticed I could kill it by touching the VC (the midde section for the RF tuned section, not the osc and not the main tuning from the antenna coil). it would stop and would only play if you turned it off and then on again. I finally swapped out the RF amp transistor and bingo, works fine. The RF amp transistor had leakage between the E and C and had the wrong v reading in the diode mode between one of the leads to the base. Anyway its working well now, I check the stereo separation, all good, so it will go back in now. I will be turning my attention back to the HV regulation next. I noted some odd bends in the vert color bars I was getting OTA, the right side bars were not straight. guessing someting in the horz sweep. I will check caps around there esp the coupling caps, and mess with the horz osc/horz out to see if I can get it working, but I need the get the HV regulation working 1st.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:09 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.