Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Introductions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 12-06-2010, 11:17 PM
JoeNewberry's Avatar
JoeNewberry JoeNewberry is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: Acworth, GA
Posts: 57
Thanks bgadow. My own copy of Sam's Photofacts for KCS78B, after being lost in the mail for a week, showed up yesterday evening. Superficially, just looking at the picture of the underside of the chassis and the real thing, it doesn't look like much has changed. There are definitely a few extra components, I'll need to sit down and study on it a bit to see just what's different, then I'll take some pictures and come back here for help.

The topside looks identical, except that one of the tubes from the high voltage cage is oriented differently on the older chassis design. It sticks out of the cage on the old one, where as the one on the KCS78C is fully inside it.

One thing that surprised me on the schematic is that a couple of little gumball sized things I thought were oddly shaped high voltage resistors (they're color coded, they have a resistance, etc.) are actually inductors. When I think of an inductor I think of air coils, so that was definitely something new.

I got the CRT Analyzer/Rejuvenator last week and the 17QP4 tested bad. I let it warm up for about four hours, and it didn't climb out of the red. I ran it at 8V instead of 6.3 for about an hour, then did the remove shorts option a few times and got it up to the line between red and green. I figured what the heck and did the dynamic rejuvenate and got it up to a couple bars into the green. It's still not very good, and no amount of additional warming up or short removing seems to be able to get it any higher, but I am hopeful that I'll at least have something to look at after (if) I get everything else working.

While I wait for the capacitors to come (the next time I order parts from Canada, I'm going to pay the 2 extra dollars for air mail), I'm reading "Television and Radio Repairing" by John Markus. It makes me feel a little sad to read how optimistic the author is about the future of TV and radio repair, after seeing the thread on here about the death of the TV service business. Even though he highly recommends it and even gives examples, I don't believe I'll be rushing to produce business cards for my budding TV business anytime soon.

Based on the lack of response to my want post in the classifieds section for a volume knob and RCA Victor logo panel, I'm guessing these are unobtanium?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:55 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.