Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-06-2010, 11:13 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
Quote:
Originally Posted by Findm-Keepm View Post
I guess not all CRT's used the same bonding materials....
YES! I think that is the reason for some frustration on this board... methods for dealing with one type of bonding material may not be effective, and perhaps even dangerous to use to remove another type.
Dow Corning 184 for example, was sometimes used on smaller special purpose tubes where high optical quality was desired... I suspect that heat alone would not be effective to remove a faceplate bonded with 184.
jr

Last edited by jr_tech; 12-06-2010 at 11:23 PM.
Reply With Quote
  #2  
Old 12-07-2010, 12:13 AM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
Quote:
Originally Posted by jr_tech View Post
If the bonding material on a particular tube is a type of polyester resin (I believe that some were ... PPG 5252 or something like that), methylene chloride will do the job. Very nasty, however.

jr
Really nasty and dangerous. It has a high vapor pressure and will evaporate very quickly. It would have to be a very valuable tube before I'd try it.

Quote:
Originally Posted by jr_tech View Post
YES! I think that is the reason for some frustration on this board... methods for dealing with one type of bonding material may not be effective, and perhaps even dangerous to use to remove another type.
Dow Corning 184 for example, was sometimes used on smaller special purpose tubes where high optical quality was desired... I suspect that heat alone would not be effective to remove a faceplate bonded with 184.
jr
I'm not sure how you'd do that either. I still have a scar from trying to remove a PMT from a light guide that we wanted to save that had been bonded with Dow 184. Have you ever seen a cataract or similar form with 184? I'd expect it to last nearly forever. Rebuilding a CRT bonded with it would be a real bear. A long term soak in trichloroethylene would swell the 184 and loosen the bond, but is also hazardous.

Dow 184 is nearly ideal for the purpose, but would break the bank for a large CRT.
Reply With Quote
  #3  
Old 12-07-2010, 12:49 AM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
Quote:
Originally Posted by jeyurkon View Post
Have you ever seen a cataract or similar form with 184? I'd expect it to last nearly forever.
Yes, I have observed partial de-lamination on some tubes using 184.... sort of looked like "worm tracks" in the material.

Quote:
Originally Posted by jeyurkon View Post
Dow 184 is nearly ideal for the purpose, but would break the bank for a large CRT.
I see that Amazon has the material listed, wonder how many 21" crts could be bonded with an 3.9kg "kit" for $336 ?

jr
Reply With Quote
  #4  
Old 12-07-2010, 11:27 AM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
Quote:
Originally Posted by jr_tech View Post
Yes, I have observed partial de-lamination on some tubes using 184.... sort of looked like "worm tracks" in the material.



I see that Amazon has the material listed, wonder how many 21" crts could be bonded with an 3.9kg "kit" for $336 ?

jr
Guess it would depend on the bond line. If it was 1/8" you could do about five 21" CRTs.

John
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:15 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.