![]() |
|
|
|
#1
|
||||
|
||||
|
I see a quite similar Sylvania in Beitman's 1952 Most needed TV book. Page 177. Digital copies exist on various places on the 'net. I see a few strange things, like the power supply has a -135V and another supply at +125V. Some circuits like the vertical and horiz use both, ie, their cathodes draw electrons from the -135V supply and the plates draw current from the +125V (remember, current flow is in the opposite direction of the flow of electrons, blame Ben Franklin for getting it backwards). Some low power circuits draw only from one or the other. And become effectively in series. So some of those electrolytic cap outside cans may be at some high voltage compared to the chassis, maybe even that hack masking tape one. I see an added electrolytic cap as well.
__________________
|
|
#2
|
||||
|
||||
|
If you need the service info I can scan it for you. But not right away.
The power supply section is indeed strange. It looks like they kept the overall design of their earliest set and made minimal changes. Instead of using selenium rectifiers to make a separate negative supply they took the high and low sides of the floating 260V supply and put a voltage divider across it tying one point to chassis ground. The ground return will be fairly high impedance, but anything that uses both +/- as described by wa2ise will see a normal impedance. John |
![]() |
| Thread Tools | |
| Display Modes | |
|
|