|
On that chassis, there are 3 or 4 STR-type IC regulators (on heat sinks, lined up appx in the center of the main board from the front to the rear), and those are 98% surely causing that problem due to cracked solder joints. I've fixed literally hundreds of those. on the bottom of the board, find the plastic frame reinforcement that runs from front to back, and you will see those bad connections. Resolder all of the pins from those regulator ICs. And Radiotvnut is also correct, in that the horizontal drive transformer gets bad connections. Follow the Base leg of the horizontal output transistor to the driver transistor and transformer, and solder the transformer legs.
Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10
|