![]() |
|
#7
|
||||
|
||||
|
Quote:
PS Series - Film-Paper, and the most widely used by OEMs in TVs. 225P - Polyester Film/Foil 418P - Also a Polyester Film/Foil and widely used by OEM's in TVs. 715P/716P - Polypropylene (may be polyester in lower voltage ratings) - used in higher voltage/pulse apps, as in HV circuits. SBE now makes all Orange drops, even those for Vishay/Sprague. There are others (SBE has about 20 types of Orange Drops) but the above were the most widely used in the 50s/60s/70s. It's the PS series that give you headaches - the impregnant gets fully absorbed by the paper, leading to leakage. I've seen "NOS" 6PS-series Spragues with 5 megohms of leakage, and even had a few .0022uf/600V (6PS-D22) caps with flaky epoxy on the ends. 1970's vintage, never used, just went bad in the parts bin. My Sencore LC102 gets some mileage everytime I come across NOS film caps in my parts bin - new doesn't always mean "good". Worse yet, the OEM caps aren't marked to tell what series of orange drops you have. I had a Setchell Carlson I recapped with NOS Sprague Orange Drops that gave me a fit with sync and AGC. I swapped some of them with CDE caps from Allied and fixed it. I've never come across a bad "brown" Arco-Elmenco cap, ever. They made film/foil caps with the brown epoxy for Aerovox, GE, and themselves (EM on the cap). Maybe I'm just lucky. RCAs use a ton of these - my CTC16 is full of them, all good. Cheers,
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
| Thread Tools | |
| Display Modes | |
|
|